Getting started with the ENIT Agent is quick and easy. We have designed the system in such a way that only a few steps are required for commissioning, for which no previous technical knowledge is required. ENIT takes care of the subsequent configuration so that data collection can begin on the same day.
Your start with ENIT
Usually, one agent per location is sufficient. In special cases, additional agents may be necessary due to local conditions. If this is the case, we will find a suitable solution for you.
Basically, the prices depend on your monthly energy consumption. We offer the option of buying or leasing. You are welcome to contactus directly for an individual offer without obligation .
We see the measurement concept as the foundation of efficient energy management. We have therefore developed a special tool for creating a holistic measurement concept, which you can use to plan and document your measurement concept in a structured manner. Of course, we also support you with our experience of over 200 individually developed measurement concepts. You can benefit from our expertise both remotely and during on-site appointments.
At ENIT, the "Team Operations" takes care of customer and project support. As a customer, you have a personal contact in the form of one of our in-house project engineers at your side.
Integration of the ENIT Agent into your company
In principle, any number of meters can be integrated.
It is always important to us to continue using your existing measurement infrastructure. In order to implement the most cost-effective measurement concept for you, we check exactly which additional hardware is required for your application.
ENIT is independent of measurement technology manufacturers and has many years of experience in the targeted and economically sensible selection of measurement technology. We can therefore recommend the measurement technology that perfectly meets your requirements.
Yes, in addition to data from electricity meters, measured values from gas, water, heat and compressed air meters, for example, can also be recorded and displayed.
In general, data from other systems can be integrated, although the existing interfaces of the systems to be integrated must be checked on a case-by-case basis.
By default, instantaneous values such as currents, voltages or power are recorded every 15 seconds. Consumption values for electricity, water, gas and other media are recorded every 5 minutes. Depending on your requirements, individual data acquisition rates can also be implemented.
ENIT Agent Software
The number of software users is not limited in principle.
Of course, we will set up access for you so that you can also log into your system securely and reliably from outside your company. This allows you to maintain control even when you are on the move.
This is not a problem. You can use various calculation operations to create additional "virtual" measuring points from your already measured consumers. Watch the video here, which explains the configuration of such virtual channels step by step.
Most PV systems are measured by a separate meter that can be integrated into the ENIT Agent. In addition to the consumption and output of energy, this meter often also provides other measurement channels such as the current generation or reactive power.
Further questions
Beautiful, as (almost) always. If the sun often shines at your location, we will be happy to check whether investing in a PV system is worthwhile for your company based on your individual load profile.
Your electricity bill includes your company's energy-related key data such as electricity consumption and the power price. Using the measured values recorded by the ENIT Agent, you can compare the respective figures, check them for plausibility and take action against your electricity supplier in the event of deviations.